HyperV LAB with Microsoft Failover Cluster in Server 2012

This Hyper-V Lab is with, Active Directory and SCVMM inside the Hyper-V Server. Below is the NIC configuration table I have used to create my Lab.

NIC Card Names
HostName	Network IP	iSCSI IP (Vmnet 4)	Hearbeat IP (Vmnet 3)	RAM	Server Role
iSCSIServer	Not Needed	10.10.10.20/24	Not Needed	1 GB	Microsoft iSCSI Target
HyperVclus01 (Cluster object configured in Failover cluster)	192.168.33.33/24	Not Needed	Not Needed	1 GB	Cluster Server
Host1	192.168.33.31/24	10.10.10.31/24	172.16.0.31/24	2 GB	HyperV/Failover clustering
Host2	192.168.33.32/24	10.10.10.32/24	172.16.0.32/24	2 GB	HyperV/Failover clustering
VM AD	192.168.33.34/24	Not Needed	Not Needed	512 MB	VM inside HyperV

1.      VM's and Configuration.

Note: All the Hyper-V machines are virtualized in VMWare as this a Lab Configuration not a production configuration

2.      Installing and configuring Hyper-V on Host1.

3.      Configure Hyper-V Network (Virtual Switch).

4.      Create and configure a Domain Controller Server VM.

5.      Join Host Server 1 to the Domain.

6.      Configure HyperV hosts in AD.

    

7.      Configuring SAN and Microsoft iSCSI initiator.

1.      Format and Configure SAN Volumes.

8.      Failover Cluster Configuration.

1.      Installation and Configuration of Failover Cluster Services on Hosts.

2.      Adding a Storage to the Cluster

3.      Configure the Witness Disk and Quorum

4.      Configuring Hyper-V Folder Locations on Host 1

5.      Moving DC to the Shared Storage and Cluster

9.      Cluster Aware Updating.

10.  Installing and Configuring HyperV on Host2 (HyperV Server2)

1.      Configuring Host Server 2 (Follow the Configuration of Server 1).

2.      Configuring iSCSI Initiator and shared disks on Host2.

3.      Configure the Failover Cluster Manager on Host 2.

4.      Configuring Hyper-V Folder Locations on Host 2